Pro-Tech EB-471LF M1 Manuel d'utilisateur télécharger pdf (Page 34)

Chapter 3 Software Configuration

Page:3-4

EB-471LF USER

′

S MANUAL

3-3. FLASH BIOS UPDATE

3-3-1. System BIOS Update:

Users of EB-471LF can use the program “Awdflash.exe” contained in

the Utility Disk for system BIOS and VGA BIOS update.

3-3-2. To update VGA BIOS for LCD Flat Panel Display:

As EB-471LF user, you have to update the VGA BIOS for your specific

LCD flat panel you are going to use. For doing this, you need two files.

One is the “Awdflash.exe” file and the other is the VGA BIOS for ATI

Rage Mobility M6 file for LCD panel display. Both file must be

provided by the vendor or manufacturer. When you get these two files

ready, follow the following steps for updating your VGA BIOS:

1. Install “Awdflash.exe” from Utility Disk to Drive C.

2. Insert the VGA BIOS file you have obtained from the vendor.

Type the path to Awdflash.exe and execute the VGA BIOS update

with file H15bxxxx.bin

3. C:\UTIL\AWDFLASH>AWDFLASH H15bxxxx.bin

4. The screen will display as the table fount on the next page:

FLASH MEMORY WRITER v7.XX

Flash Type – SST 49LF004A /3.3V

File Name to Program: H20bxxxx.bin

Checksum: XXXXX

Error Message: Do You Want To Save BIOS (Y/N)

If you want to save up the original BIOS, enter "Y" and press < Enter >.

If you choose "N", the following table will appear on screen.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

Pas de commentaire

Pro-Tech EB-471LF M1 Manuel d'utilisateur Page 34